Model #706655070 CRAFTSMAN Workbench / Project

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers




Defiantly understand your concern of proper installation. Looking on the site myself, I located some information that can be very helpful. To view I have attached the links below while you wait for the experts advise. Hope this helps!

Read More
maira -
July 27, 2013

Thank you for submitting your question, I can understand your concern in proper installation. I will be glad to assist you today. Most of these types of drawers will have catches on the slides that need to be released to pull the drawer out. The new drawer can then be inserted into the slides and will likely snap into the catch when pushed in. I have provided more information below:

  1. If you pull the drawers out there full length, you should see two black tabs to release the drawer glide.
  2. Push one up and the other side push down and then pull the drawer out.
  3. The drawer glides are a snap type. I would suggest that you use a rubber mallet to tap on the tabs that hook into the drawer to remove.
  4. The glides are held into the cabinet with a tilt and snap type of installation just like the drawers

I do hope this helps, if you are needing additional assistance please reply to the thread below with details. Thank you for choosing Manage My

Read More
Maira -
Sears Technician
July 29, 2013
See more answers

Top Parts