Model #706 HOOVER Vacuum, Upright

  • Agitator
    3 Results
  • Cleaningtools
    3 Results
  • Handle
    3 Results
  • Hose
    3 Results
  • Mainbody
    3 Results
  • Motor Assembly, Hood
    3 Results
  • Outerbag
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore elite refrigerator light not shutting off

A:

The Refrigerator is one of the most important appliances in the home and by far a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a question that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
August 23, 2011
A:

That known issue applied to Kenmore refrigerators with model 795.77549600 up to serial number 704KRxxxxx. Based on your serial number (706KR00061), that refrigerator should have the updated control board, wire harness and socket. I cannot guarantee that your failure would be covered under that lifetime warranty that covered the model 795.77549600 up to serial number 704KRxxxxx. Since your refrigerator is outside of the serial number range, you may need to pay for the labor service charge and parts to fix that problem. You can still schedule service but it will be up to the technician whether the parts and labor costs will be charged or not. If you need more help with this problem, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
August 25, 2011
A:

thanks for your reply. I'm bummed my frig is not in the correct serial number range. I just double checked and I definately had the correct number. I scheduled an appointment, but they can not come for 2 weeks. I took the bulbs out of the socket and put the plastic cover back on. I was worried about the extreme heat that was being generated. Do you think the exposed sockets with the plastic over them will be safe for 2 weeks? thanks!

Read More
Lisha -
August 25, 2011
A:

Yes. Since the bulbs are removed, the refrigerator will be safe. It should operate normally even though you will not have light on the inside. Sorry for the delay in the service. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
August 25, 2011
A:

I have a a Kenmore Elite trio model number 795.77713700 and serial number 706KR00089. The problem I 'm having is that the interior light was delayed in coming on when the doors opened and now the lights do not come on at all. I tried the 3 trouble shooting steps in the manual to no avail and tested the light but bulbs in a lamp to ensure they were working which they are. Any suggestions?

Read More
Brian -
March 25, 2012
A:

I have a a Kenmore Elite trio model number 795.77713700 and serial number 706KR00089. The problem I 'm having is that the interior light was delayed in coming on when the doors opened and now the lights do not come on at all. I tried the 3 trouble shooting steps in the manual to no avail and tested the light but bulbs in a lamp to ensure they were working which they are. Any suggestions?

Read More
Brian -
March 25, 2012
A:

Hello Brian. According to your model and serial number, that refrigerator should have a thermostat in that refrigerator light circuit. I provided a wiring diagram in the image below with that light circuit traced in pink and blue. That thermostat is shown in the second image. I recommend that you UNPLUG the refrigerator and check that thermostat for continuity as shown in the brief repair video that I provided below this response. If that thermostat is "electrically" open (has no continuity) then it will need to be replaced. You can order that part from this link: Lamp Harness with Safety Thermostat for Kenmore Refrigerator 795.7713700 . Be sure that you UNPLUG the refrigerator before accessing and replacing internal components. If that safety thermostat is okay, you could have a wiring failure or a bad control board causing this problem. Reply with additional details if you need more assistance.

Read More
Lyle W -
Sears Technician
March 26, 2012
A:

i have kenmore elite refrig 795.77316600 light will not turn off. how do i remove the bulb

Read More
betty jones -
September 26, 2012
A:

The image below shows how to remove the light bulbs in the refrigerator. Unplug the refrigerator and let the light bulbs cool down for a few minutes. Use a pair of gloves or a cloth to prevent burns on your fingers if you remove the bulbs while they are still warm (or hot). NOTE: There is a known issue with the lights staying on in that model of refrigerator. Within certain serial number ranges, the repair (including any damage to the socket and liner) is covered by an extension of the manufacturer's warranty (for the life of the refrigerator). I recommend that you reply with the serial number of your refrigerator and we will check to see if your refrigerator should be covered by that extended warranty for that problem.

Read More
Lyle W -
Sears Technician
September 27, 2012
A:

Lyle W - I have the following Kenmore refridgerator. Model # 795.77316600 Serial # 603MREN00028 Is it part of any extended manufacturer's warranty based on a known issue. The reason I ask is the lighting in mine previously overheated and warped the plastic light/temperature control housing.

Read More
Thomas -
July 10, 2013
See more answers
Q:

tool box drawers 706.586241

Q:

tool box drawers 706.586241


Top Parts