Model #70062 KENMORE Air-conditioner/heat pump(outside unit)

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Compressor/blower not working right in auto cool mode 70062 Kenmore Air conditioner

A:

I discovered something also: I always keep the fan on F3 (highest). When I switched the fan to F1 or F2, the unit worked as normal. It just doesn't blow anymore when I have it set on the F3 setting. Hope that helps. Thanks!

Read More
John -
September 17, 2015
Q:

What is the decibel Levels of Kenmore #79081 and #70062?

A:

While enjoying the coolness of the Kenmore air conditioner, you should also be enjoying the quietness. An expert will be along shortly with the specific information on the air conditioners that you are requesting. While waiting, I have attached a link with some helpful information.

Read More
Anna T -
July 08, 2012
A:

Thanks for contacting ManageMyLife.com. I understand your concern with want to know how much noise each ac makes. We are here to help. The noise level of the 6000 btu ac model #70062 decibel level is 54.8 high/ 50.7 medium/ 48.4 low. The noise level of the 8000 btu model #79081 ac decibel level is 60.9 high/ 56.6 medium/ 52.5 low. Since both acs produce the same amount of noise, you need to consider the size needed for the room. I hope this helps.

To visit sears.com sears.com .

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
July 12, 2012
A:

My AC doesn't blow cold air. Help.

Read More
mel -
June 18, 2014
A:

My AC doesn't blow cold air. Help.

Read More
mel -
June 18, 2014
See more answers
Q:

I have a Kenmore Model #253.70062 Air Conditioner. When the unit is mounted in a window, water inside the unit will accumulate to a certain level and then drip. Is it normal for an air conditioner...

A:

Kenmore window are great to have running properly during the summer months. I can understand your concern with the leaking. I am providing a link to the owners manual and a great article that may help you determine what may be going on with the air conditioner. An expert will respond to your specific questions within 24-48 hours.

Read More
Anna T -
July 08, 2012
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your air conditioner dripping water. We are here to help. Water should not just set in the air conditioner. It should drain out. The amount of water that collects depend on the humidity which can vary. When the air conditioner is installed you should have a slight tilt downward on the outside. This will let most of the water drain out. If you do not have enough tilt or no tilt water will just set in the air conditioner. Usually the very little water left will evaporate into the air. The manufacture is not listing the decibel level for the air conditioner. I hope this helps.

To visit sears.com sears.com .

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
July 11, 2012
See more answers