Model #6877 KENMORE Meat chopper/slicer

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Humidity Controls no longer work... 58054701700 Kenmore Dehumidifier

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dehumidifier is not working.

 
6877A30013L is the sensor that controls the humidity setting. This would be the part to replace.

  
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 11, 2015
Q:

58054501500 dehumidifier that stops working with a code 01 in display and flashing bucket full. 58054501500 Kenmore Dehumidifier

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dehumidifier is not working properly. 


This will usually indicate a problem with either the sensor or control board. However, first, check the bucket switch and float to make sure the float is not stuck. Usually the sensor # 6877A30013R will correct this problem. If the problem still occurs, then the control # EBR36909302 will need to be replaced.

To narrow it down you would need to have a technician test the parts. The sensor should be the fix. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 24, 2015
A:

I purchased and replaced the sensor assembly, sensor part # 6877a30013r and this addressed the problem, it is working again.

Read More
Carl -
June 29, 2015
See more answers
Q:

Connector to Thermistor on LG WM2050CW LG WM2050CW

A:

I have the same exact problem. Have seen this problem posted on other boards as well. Can someone please identify this connector / wire part.

Read More
Michael -
February 03, 2015