Model #6772 PORTER CABLE Saw Reciprocating

  • All-purpose Saw
    3 Results
Find part by diagram >

Question and Answers

Q:

Front burner won't click on. I can light it with a match, though Kenmore Model 9117360191

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your range. Upon researching model 9117360191; there is a spark module on this unit. The spark module is used to send the spark to the electrode. An electrode could have failed if just one won’t spark. It could be the spark module if more than one will not spark.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
March 22, 2015
A:

I have a Gemini Gas Range MGR6772 model The front left burner will not ignite I can light with a match. Please tell me what part numbers I need. Thanks Linda Braun

Read More
Linda -
March 22, 2015
See more answers
Q:

gas range MGR6772BDS Maytag Maytag cooking

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your range and I do understand your frustration. Glad to help out. I'm looking at your model number MGR6772BDS and on something like this the problem is either going to be a shorted surface burner switch or the spark igniter module control is defective. I can also be one of the four (4) surface igniter switches has likely disengaged from one of the four (4) burner valves or water was spilled/splashed and the water ran into one of the four igniter switches. If water was spilled the clicking will likely stop once the water evaporates from the switch. If water was not spilled, then the main top will need to be lifted and the manifold cover will need to be removed in order to access and test the four igniter switches. Here is a link that may help with additional troubleshooting. Just click the blue link above to be taken to the page. I trust this information will help you.





Thank you for choosing Sears PartsDirect.com.





SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 30, 2015
Q:

Which surface element do I need? MER6772BAQ Maytag Range

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Maytag range model MER6772BAQ. I am so sorry the right front element needs to be replaced. I will be happy to help you with this. I have located the right front element for you and have included the link below for you to view and order the part. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
January 05, 2015