Model #6741 KENMORE Carpet/Floor Sweepers

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Dryer not heating 11060722990 Kenmore Electric dryer

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your dryer and have a nice day

Read More
Henry -
January 29, 2013
A:

I'm sorry to hear that your dryer is not working to the fullest. I know how much that can be a pain, especially when you have a family. I have provided a link for your owner's manual of trouble shooting ideas. Please try these. If they do not work we will take the next step in getting your dryer working.

 

http://www.managemylife.com/mmh/owner_manuals/6741/KENMORE-Residential-Dryer-LR707390?brand_name_search=11060722990+

Read More
JessicaM -
Sears Technician
January 29, 2013
See more answers
Q:

Freezer door gasket replacement

A:

When it comes to getting the proper part for repair on your refrigerator can be rather difficult. While you are waiting for a detailed reply from an expert I recommend visiting the Sears parts direct website were you can view a parts list and diagram of your model. I have provided the link below. Hope this helps!

Read More
Priscilla V -
July 22, 2012
A:

Thank you for submitting your question. I know it's important to have proper seal on the freezer door and I will be happy to assist you. The freezer door gasket is part number 241872503 priced at $67.41. You can order the gasket from our Sears Parts Direct web site. To replace the freezer door gasket, Before you install a new door gasket, soak it in hot water for 20-30 minutes to remove any kinks caused by shipping. Door gaskets install on refrigerator doors two ways. Older models have screws holding the plastic inner liner to the door. Loosen the screws and the plastic liner will move away from the door letting the gasket come off. Install the new gasket with the lip under the plastic inner liner and snug the screws up, don't tighten the screws. Align the door (it will flex and warp with the screws loose) so the door is true with the cabinet and the gasket seals. When the door is aligned, tighten the screws holding the plastic liner to the door and it will become rigid. Newer models have a groove around the door and the lip of the gasket plugs into the groove. You usually have to use a small flat blade screwdriver or a putty knife to insert the lip of the gasket into the groove. I hope this information helps. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
July 23, 2012
See more answers
Q:

I have a Maytag - Double Oven M#MER6741BAW, S#12913141LG where the self-cleaning latch on the bottom oven does

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was able to locate your diagram to help locate the door lock assembly. I attached the link below. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
October 24, 2011
A:

I provided a procedure for accessing and replacing that latch on the bottom oven in the image below. You can view a parts diagram for the range on the Sears PartsDirect website. Be sure that you unplug the range before accessing internal components.

This information should help you access that component.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 25, 2011
See more answers