Model #66598002700 KENMORE ELITE Free Standing, Electric

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Chassis Parts
    3 Results
  • Upper Door Parts
    3 Results
  • Lower Door Parts
    3 Results
  • Rack And Element Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers


Kenmore double oven #66598002800: Self clean cycle won't turn on. After I press clean, it will not flash in the display, as the manual instructs.


I'm sorry to hear that you are having some difficulties with your range. I did some research for you at and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to I hope these links provided assist you.

Read More
Joseph P. -
November 09, 2011

Check to see if the either oven can be programmed to clean. Your details seem to indicate that the Clean button on at least one of the ovens is not working properly. If the door is not closed, you should see DOOR appear in the display. If the door is shut and the oven cannot be programmed in the Clean mode, then you will probably need to replace that clock control board (part 5777M251-60). That part costs over $330. I recommend that you have a service technician examine the range instead of ordering and replacing that part yourself. Here is a link for the Sears Service website: Sears Home Services .

If you are certain that the control is bad and you want to replaced that component yourself, you can order it from the Sears PartsDirect website. Here is a direct link for that part: Clock Control . Unplug the range before accessing and replacing that control. Here is a link for a video that provides a general repair procedure for replacing that control: Range Clock Control Replacement . Your range may look slightly different than the one shown in that video but the basic repair procedure is the same.

These tips should help you resolve this range failure. If you need more assistance, reply with additional details.

NOTE: This answer is based on Kenmore model 665.98002700. The model 665.98002800 does not appear to be a valid model number. Reply with an updated model number if necessary.

Read More
Lyle W -
Sears Technician
November 10, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories