Model #66595822003 KENMORE Free Standing, Electric

  • Cooktop
    3 Results
  • Door
    3 Results
  • Chassis
    3 Results
  • Control Panel
    3 Results
  • Warming Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

Only Start button on kenmore oven not working

A:

It can be real headache when your range malfunctions and displays error codes. I did a broad search and provided a link to a similar question on out site. I would suggest that you provide a little more information such as the make and complete model number of your product, so your expert will be able to provide you with the best possible answer. Just click on reply down below, where you can provide the additional information.

Read More
Julio -
March 19, 2013
A:

Model # 65595822003 Kenmore oven

Read More
sam -
March 19, 2013
A:

66595822003 sorry

Read More
sam -
March 19, 2013
A:

Thanks for the information about your oven not working, I will be glad to assist you with this issue.  Based on the description you provided I believe the main control was damaged when the rodent shorted the wires. The control is delicate and is easily affected by any short to ground. Have you verified that the range is receiving the correct power supply, does the cook top work, burners heating. If this function on range works I suspect the control is damaged. I will attach a wiring diagram so you can check the voltage to control and out to bake element. You will need a high quality volt/ohm meter to properly make checks to verify control issue. I hope this helps, if you need additional assistance please reply with details and I will be happy to respond. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
March 21, 2013
See more answers
Q:

Self cleaning oven question

A:

The oven catching on fire sounds dangerous. I suggest you set service to have your range looked over and checked by a certified technician. I am adding a link below in where you can set service to have a certified technician fix your range. I hope this helps with your range troubles while you wait for your expert response.

Read More
Joseph P. -
December 26, 2012
A:

There are situations where a controlled fire can be seen inside the oven cavity when the self clean cycle is used. That normally occurs when excessive spills of grease and residue were not wiped out of the bottom of the oven cavity before that cycle was started. Since the door was locked, the air inside the oven cavity was limited so that any fires that started would normally be smothered due to a lack of oxygen. Once the oven cooled down, the door should have unlocked. You can shut off the house circuit breaker and examine the bake and broil element for damage. If you see no apparent damage, then you will normally be able to use the range. If you start a self clean cycle, be sure that you follow the guidelines in your owner's manual. Wipe out spills and loose soil before starting the self clean cycle. Run that cycle before the oven becomes heavily soiled to reduce smoke and the potential for a fire to occur. If the oven operates properly, you should be able to wipe out any loose spills and soil then start a new self clean cycle. If you see a small, controlled fire start inside the oven cavity, keep in mind that it will be smothered due to a lack of oxygen. After the self clean cycle finishes, you should be able to use the oven normally. Run that self clean cycle whenever light or medium soil builds up in the oven going forward.

If you suspect that the range was damaged due to that oven fire, you can schedule a service technician to examine the range and repair it if necessary. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
December 27, 2012
See more answers
Q:

Why does my Kenmore electric range buzz loudly?

A:

With the Range not working is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom links for some possibilities. Hope this is of help.

Read More
Priscilla V -
February 01, 2012
A:

Thank you for your question and I understand your concern.

Your model range has a control transformer which is likely making the buzzing/humming noise. The transformer is not necessarily going to fail because it's humming. I would continue using the range. If and when the transformer fails, the display will go blank and then you will no longer be able to use the oven.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
February 03, 2012
See more answers

Top Parts