Model #66592172300 KENMORE Free Standing, Electric

  • Cooktop
    3 Results
  • Door
    3 Results
  • Chassis
    3 Results
  • Control Panel
    3 Results
  • Bake Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

????? 66592172300 Kenmore Electric range

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kenmore Electric Range. I am so sorry you are having problems with it. We will be happy to help you with this, but will need some clarification.

Does your question mean that the knobs turn on the wrong burners? If so, which knob turns on which burner? Please give examples, such as "far left knob turns on left front burner". Or by "does opposite" do you mean when you turn the knob "off" it turns the burner "on"? 

We look forward to your resubmitted question with the additional details requested. Once we have further clarification we can research this problem for you. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 07, 2014
A:

i turn the control knob on high get simmer or low. turn it on low get high

Read More
carol -
April 07, 2014
A:

do u have an answer yet?

Read More
carol -
April 07, 2014
A:

Thank you for your quick response and the additional clarification. I need a little more information please.

Do all of the surface burners have the same problem? If not, which burners are affected?

On the dual burners does this happen during the single burner use, dual burner use, or both?

If it is just one burner, then you most likely have a faulty infinite switch, which will be an easy repair. However, if all of the burners are affected, then it could be a wiring issue or a problem with the electronic control. 

This additional information will help us narrow the issue down further. Thank you again for choosing Sears. 

Read More
Rachel Morgan -
Sears Technician
April 07, 2014
A:

it is all 4 burners. duel controls i don't know where u mean inside the knobs or the burners wiring or a control panel wiring

Read More
carol -
April 07, 2014
A:

hello its all 4 burners and i know what u mean by dual burners. the outer comes on when i put the knob in grey place on the knob which is the lower setting on this stove. I turn the knob to white or high the center of burner goes on for a very short time and then down to no heat or low heat i do not have a book on this appliance and i would appreciate your answers soon, please

Read More
carol -
April 07, 2014
A:

hello its all 4 burners and i know what u mean by dual burners. the outer comes on when i put the knob in grey place on the knob which is the lower setting on this stove. I turn the knob to white or high the center of burner goes on for a very short time and then down to no heat or low heat i do not have a book on this appliance and i would appreciate your answers soon, please

Read More
carol -
April 07, 2014
A:

Thank you again for the quick response. The left and right front burners have two elements. If you turn the knob to the right, you are using just the small burner. If you turn the knob to the left, then you are using both burners. Does the "opposite" effect happen when you are using just the single burner? Does it happen when you are using the dual burner option?  Or both? 

Since all four burners are being affected, it is not likely it is the infinite switches (each knob activates a different switch). The chances of them all going out at the same time is very slim. Have you done any work on the range recently? Had any electrical work done to the house or had any power outages? 

Thank for the additional details as we continue to research this issue for you. 

Read More
Rachel Morgan -
Sears Technician
April 07, 2014
A:

I have done what u instructed, i am thinking it is working correctly now i had no idea the knobs went to the right and left. i do not have a book. I will see how this works as i use the stove. Thank you.

Read More
carol -
April 07, 2014
A:

I have done what u instructed, i am thinking it is working correctly now i had no idea the knobs went to the right and left. i do not have a book. I will see how this works as i use the stove. Thank you.

Read More
carol -
April 07, 2014
See more answers
Q:

how do I reassemble my kenmore oven door, model #66592172300

A:

Owner's manuals are great to have for any troubleshooting problems. I have token some time to search your model number and found your owner's manual. I have attached the link below. Hope this helps!

Read More
Dezeray S -
August 02, 2011
A:

We don't have instructions for just assembling the oven door. I am sending you some images showing disassembling the oven door. Reading these will hopefully give you the information you need.

Read More
Jimmy K -
Sears Technician
August 04, 2011
A:

Dezeray and Mr Knight, Thank you both so much for your help. I really appreciate each of you taking the time out of your busy day to try and help me. I tried to thank you the other day but the sight was experiencing problems and I was unable to. Thank you very much. Both of you!!! Hopefully when I get the other piece I need, that they broke the first time, I will have my stove back! :o) Lisa Hale

Read More
Lisa -
August 07, 2011
A:

Lisa, I hope you are able to get your stove working. Thanks for using Manage My Life.

Read More
Jimmy K -
Sears Technician
August 08, 2011
See more answers
Q:

Kenmore electric triple task bottom oven drawer not turning on, model 665-92172300

A:

I understand how important it is for you to have your oven heating properly so that you can bake a great meal. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.

Read More
Joseph P. -
November 22, 2010
A:

Check to see if the indicator light is turning on for the triple task oven drawer when it is turned on. If the indicator light is working then the control components are apparently okay. The thermal fuse is likely "open" to prevent the oven drawer from heating in this scenario. I provided technical information on the oven drawer in the image below. The thermal fuse is shown as Key 23 in the parts diagram at the bottom of the image. You can unplug the range and check the continuity of this component using a volt/ohm meter. If it is "open" then it will need to be replaced. Here is a direct link to that part on the Sears PartsDirect.com website: Thermal fuse . Be sure that you unplug the range before accessing internal components and replacing this fuse.

If the indicator light does not turn on, then you could have a bad thermostat or a failed relay on the electronic oven control board.

You can unplug the range and check the continuity through the thermostat using a volt/ohm meter. If the thermostat is okay, then you may need to replace the control board. You can order parts from the Sears PartsDirect website.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 23, 2010
A:

Thank you for the info. I ordered 2 thermal fuses because this is the 2nd time it has to be replaced...it must be a faulty part? Are there any special tools needed to replace/repair this item? Thanks again, Diane

Read More
Diane -
December 01, 2010
A:

There are not any special tools that you should need. You will just need a screw driver to remove and replace the thermal fuse. Be sure that you UNPLUG the range before replacing this component. If this drawer keeps blowing the thermal fuse, you could have a problem with the control switch or sensor that is used by that control switch. Reply with additional details if you need more help with this problem.

Read More
Lyle W -
Sears Technician
December 01, 2010
A:

We just replaced the thermal fuse and the triple task drawer is still not turning on. The indicator light turns on. We pressed stop/clear and the only code that shows is E0/F0. We took the drawer out and everything seems ok. Is there anything else that we can check without having to call a repair person? Thank you!

Read More
Diane -
December 12, 2010
A:

The image below shows a strip circuit diagram for the triple task drawer. Since the indicator light turns on, the portion of the circuit is traced in red. The heating problem is limited to the section traced in green. Assuming that the thermal fuse is good since it was just replaced, I recommend that you UNPLUG THE RANGE and check the resistance of the elements. The resistance of the upper element should measure about 36 ohms. The bottom element should measure about 10 ohms. If either of the elements are "open" (measure Ol -- open load or infinite resistance) then the bad element will need to be replaced. If the elements are okay, I recommend that you check the wiring. A break in the wiring that is traced in green will prevent the drawer from heating.

Read More
Lyle W -
Sears Technician
December 13, 2010
See more answers

Top Parts