Model #66578009803 KENMORE ELITE Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Upper Door Parts
    3 Results
  • Lower Door Parts
    3 Results
  • Rack Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Red Light on Control Panel 66578009803 Kenmore Elite Free standing gas range

Q:

Upper oven won't ignite on model 66578009803 66578009803 Kenmore Elite Free standing gas range

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your range is not working properly. 


Click here for burner igniter video.

7432P143-60 upper bake igniter. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 08, 2015
Q:

Kenmore Elite double Oven Model 665.78009803 - initial SABBATH mode issue - but now another 665.78009803

A:

I understand how it can be frustrating with the oven not functioning properly. While you are waiting for your expert answer, I did some research on your model. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
January 07, 2013
A:

Thank you for your question and I understand your concern.

I was not able to understand the symptom because the text became messed up. I looked up your model and it appears that Key# 12 in the parts diagram includes the membrane and control board. This is the part you will need to order and replace if the control is not responding correctly.

Below is what I found in the details. The oven went into SABBATH mode - found that holding the CLOCK button for 3 seconds will clear it. It appeared to clear but now the oven works once. If I wait for a minute I hear a beep and the displays shows "timer 2". I cannot get out of that. I hit any other button and "Timer2" is displayed. I wait again for 30 secs and hear a beep. I try to hit the clock button, nothing, I hit the timer 1 or timer 2 button and sometimes that works. I get out of that and sometimes the oven (top or bottom) works but just for that one time then it beeps and "timer2" is displayed and I am back to square one. It is random and quasi-reproducible.

Is it the control panel?

If you could supply me with the details again so I can understand I will be happy to assist you further.

Read More
Joey S -
Sears Technician
January 08, 2013
See more answers

Top Parts