Model #66575844006 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Door
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Warming Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

"E0" "-F0-" On Oven Screen after power outage, Kenmore Gas Range-- Please Help

A:

I understand your Oven Screen is displaying an error code of E0-F0. I found a question in Manage My Life under the Answers button that was similar to the one you asked. I think this question will give you the answers you need. I attached the link below, I hope this helps!!!!!

Read More
Raquel F -
August 16, 2010
A:

Thank you for your question.

  • I think the interruption of power confused the Electronic Oven Control.

  • I looked at technical manual your your model range and that say's that if the E0/F0 appears it means that you have pushed the cancel/Off pad for more than 5 seconds and displays that there are no pre-existing faults. Press cancel/off pad and release.

  • With the E0 error code, I suggest you push and hold the cancel/off key pad for 5 seconds until the last code is displayed.

  • Disconnect the power to the range for 60 seconds and then re-connect power.

  • Reset the clock for the correct time of day and observe the display for 1 minute. This should clear and reset the range for normal operation. If error code returns or does not go away disconnect power to range and replace the control.

  • If the oven door is locked or is still locked after the reset power procedure.

  • Set the range for a short clean cycle and cancel the cycle after 30 seconds this should release the door if it is locked and or the LOC should be gone from the display and normal operation of the range should be available.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Sam A -
Sears Technician
August 17, 2010
See more answers
Q:

What is the difference between part #8523665 and part #8523666?

A:

The difference in the 2 control boards is that one is for gas ranges and one is for electric ranges.

The control board part# 8523665 fits these electric range models:

66595032200 KENMORE Free Standing, Electric RANGE 66595033200 KENMORE Free Standing, Electric RANGE 66595034200 KENMORE Free Standing, Electric RANGE 66595039200 KENMORE Free Standing, Electric RANGE 66595822004 KENMORE Free Standing, Electric RANGE 66595822005 KENMORE Free Standing, Electric RANGE 66595823004 KENMORE Free Standing, Electric RANGE 66595823005 KENMORE Free Standing, Electric RANGE. 66595824004 KENMORE Free Standing, Electric RANGE 66595824005 KENMORE Free Standing, Electric RANGE 66595825004 KENMORE Free Standing, Electric RANGE 66595825005 KENMORE Free Standing, Electric RANGE 66595829004 KENMORE Free Standing, Electric RANGE 66595829005 KENMORE Free Standing, Electric RANGE

And the control board part# 8523666 fits these gas range models:

66572022101 KENMORE Free Standing, GAS RANGE 66572022102 KENMORE Free Standing, GAS RANGE 66572023102 KENMORE Free Standing, GAS RANGE 66572024102 KENMORE Free Standing, GAS RANGE 66572029102 KENMORE Free Standing, GAS RANGE 66575022101 KENMORE Free Standing, GAS RANGE 66575022102 KENMORE Free Standing, GAS RANGE 66575023102 KENMORE Free Standing, GAS RANGE 66575024102 KENMORE Free Standing, GAS RANGE 66575029102 KENMORE Free Standing, GAS RANGE 66575032200 KENMORE Free Standing, Gas RANGE 66575033200 KENMORE Free Standing, Gas RANGE 66575034200 KENMORE Free Standing, Gas RANGE 66575039200 KENMORE Free Standing, Gas RANGE 66575842004 KENMORE Free Standing, GAS RANGE 66575842005 KENMORE Free Standing, GAS RANGE 66575842006 KENMORE Free Standing, Gas RANGE 66575843005 KENMORE Free Standing, GAS RANGE 66575843006 KENMORE Free Standing, Gas RANGE 66575844005 KENMORE Free Standing, GAS RANGE 66575844006 KENMORE Free Standing, Gas RANGE 66575849005 KENMORE Free Standing, GAS RANGE 66575849006 KENMORE Free Standing, Gas RANGE

Read More
Joey S -
Sears Technician
July 30, 2008

Top Parts