Model #66575842003 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Door
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Warming Drawer/broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

What do I need to replace for an error code of "F1-E1"?

A:

The "F1-E1" fault code indicates an EEPROM failure. Based on your details the range/oven control board which is also referred to as the microcomputer will need to be replaced. The part number of the microcomputer needed is #8523666 which is a substitute for #8273775.

Read More
Joey S -
Sears Technician
December 31, 2009
A:

My gas oven shows error code E0 F2. I have pushed off/cancel button which clears it but it keeps returning? Thank you.

Read More
Anonymous -
December 03, 2011
See more answers
Q:

wiring diagrahm

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner

Read More
James -
October 11, 2011
A:

The wiring diagram for that range is shown in the image below. Follow electrical safety guidelines when using that data. Unplug the range before accessing internal components.

If you are having problems with the bake burner igniting, I recommend that you use the troubleshooting shown in this link for a previous answer: Where can I find specific procedures for checking the control board functions on my Whirlpool gas range model TGS325MQ4? .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
October 12, 2011
See more answers
Q:

My Kenmore Gas Range - Model 665.75842003 - has a two error codes displaying - one in red E1 and another in green F1. Does anyone know how to fix?

A:

I know how important it is to have a good working range in your home so that you can make a great meal. While you are waiting for an expert answer, I did manage to find a link that will provide you with some more tips about what may be causing your problem. I hope my link is useful.

Read More
Joseph P. -
February 17, 2011
A:

Thank you for your question and I understand your concern.

The "F1-E1" fault code signifies a failure within the electronic oven control. Disconnect power to the range for longer than 30 seconds. Re-apply power and observe the display for longer than a minute. If the failure remains, disconnect the range from the power supply and replace the electronic oven control board. The electronic oven control board is part #8523666.

I added the instructions in the image below. NOTE: Disconnect the range from the power source before servicing your range.

You can order the oven control board at Sears PartsDirect

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 18, 2011
See more answers

Top Parts