Model #66575824001 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

oven ignition 66575824001 Kenmore Gas freestanding range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Range Kenmore model 66575824001, door lock after self clean error code e1 f5.

A:

Having an error code on a range can be a hassle and keep your appliance from working properly. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
August 11, 2011
A:

Thank you for your question and I understand your concern.

I added an image below showing how to access the door lock motor located on the rear of the range. You can unlock the door by removing the lock motor and then push or pull the rod. NOTE: Disconnect the power cord before access the lock motor.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 12, 2011
See more answers
Q:

Why won't the burner of my Kenmore range model 665.75824001 light after I self cleaned the oven?

A:

The first image below is from your installation guide. It shows how to access the burner and check it. Since you hear the clicking, the ingiter on the oven burner is likely sparking. Check it to make sure that it is sparking. Check for any spill or obstruction to the holes in the burner around the igniter.

If this does not help then you will need to check gas valve. The theory of operation for the Direct Spark Ignition system in this range is shown in the second image. The component check for the gas valve is on the top left hand portion of this image. Check the solenoids for both gas valves as described. If one is bad then the gas valve (part 9761959) will need to be replaced. You can order this part from the Sears PartsDirect website. A technician is normally required to replace this valve. If you have the technical ability to safely replace it yourself be sure that you properly check the installation for leaks.

If the gas valve is okay, then you may need to replace the DSI board.

This system is difficult to diagnose. If you need more help, resubmit your question with additional details or you can also call a technician to check the system.

Read More
Lyle W -
Sears Technician
October 29, 2009

Top Parts