Model #66575272500 KENMORE Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Bake Drawer & Broiler Parts
    3 Results
  • Door Parts, Optional Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Clock display on Kenmore gas range does not work.

A:

I can understand how this would be frustrating for you. While you are waiting for your expert answer, I was able to do some research. It sounds like you would need a new control board. This is part number 9760121, and it will cost about 425.03. It is a part you can install yourself. I hope this helps.

Read More
aashe -
August 18, 2011
A:

This is an unusual problem but from the description you give the problem will be in the control board.

First I suggest checking if the oven is in the "Sabbath Mode." In the Sabbath mode the oven will work but the display will not display all information. The image below tells how to enter and cancel the Sabbath mode. Hopefully this is your only problem.

If the unit is not in Sabbath mode then I would suggest just continue using the oven as it is. The 9760134 control is expensive at $425 dollars and I'm sure for that amount of money there are other ways to tell the time in the kitchen.

The control can be obtained from the following link if you wish: Sears PartsDirect .

To access the control first unplug the unit and remove the rear panel to the console.

I hope this helps. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
August 20, 2011
See more answers
Q:

What would cause my oven spark ignitor to spark several times and not ignite the burner and smell gas?

A:

The air to fuel mixture likely needs a slight adjustment. I recommend closing the bake burner air shutter just a little bit and then see if it will ignite. I added information and instructions in the image below.

If you are unable to correct the failure, I recommend calling a service technician to diagnose and repair your range.

Read More
Joey S -
Sears Technician
July 10, 2009
Q:

Why has the timer on my Kenmore stove stopped ringing?

A:

All of the timer functions are internal to the ERC, Electronic Range Control. This repair will require replacing the ERC, part number 9760134.

Read More
biker dave -
Sears Technician
February 21, 2009

Top Parts