Model #66575014104 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore range model number 66575014104

A:

I did some research on your model number but was not able to find a conversion kit. Your expert will be able to help answer your question. It may take two business days for your expert to reply. I do hope that everything works out on the range.

Read More
Marc -
July 12, 2013
A:

Thank you for your question. The installation manual has information and instructions for conversion for this model. The manufacturer information indicates conversion to gas must be done by a qualified technician.  Available parts for this model can be located at Sears Parts Direct. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
July 13, 2013
See more answers
Q:

oven not working

A:

Our Range is the heart of our Kitchen. I'm really sorry to hear that you are having some difficulties with your Kenmore Range. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links provided assist you.

Read More
James -
January 03, 2012
A:

Thank you for your question and I understand your concern.

The bake burner and bake igniter have been modified to assure consistent oven ignition and performance. The burner has been modified by increasing the number of ignition ports located at the electrode tip and the electrode shield has been modified by reducing the amount of material around the electrode ignition point.

The burner and igniter will come as complete assembly. The part number of the new burner is #8190618 which can be ordered from SearsPartsDirect .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 05, 2012
A:

joey thanks for the info, but i have to ask will the burner and igniter stop the control panel from clicking when the oven temp is calling for it to relite ,as it clicked on the start up because when the oven has cooled down there is no click in the panle no click in the oven THANKS JOHN i just want to make shure befor i spend any money its like the panel is not sending the signal to the burner THANKS AGAIN JOHN

Read More
Anonymous -
January 05, 2012
A:

Anonymous: It should reduce the amount of clicks but it will not stop it completely. It is normal to hear a click when a relay energizes to bring on the heat.

Read More
Joey S -
Sears Technician
January 06, 2012
See more answers

Top Parts