Model #66572132300 KENMORE Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Door Parts
    3 Results
  • Drawer & Broiler Parts, Miscellaneous Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

inconsistant bake temp 66572132300

A:

Thank you for choosing sears I would be happy to help you with yourrange. Upon researching model 66572132300; based on the description provided and the parts you have already replaced, it sounds like the control board is causing the unit to operate inconsistently.  The control board governs the functions of the oven including the temperature that the oven goes up to, so when it fails it can show as being a certain temperature while the oven temperature is different. The control board for this model has been discontinued and is no longer available, at this time we do not have a replacement substitution.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
February 19, 2015
Q:

Gas Oven won't light. 665.72132300

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

 

Read More
Joseph P. -
July 23, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when your items in the oven aren't working as it should.

May I ask first to follow these instructions:

1.  Close the Kenmore oven door firmly and make sure that nothing is preventing the door from closing completely. The self-cleaning cycle will not run if the door is not completely shut.

2.  Press the "Start" or "Enter" button after pressing the self-cleaning button to start the cycle.

3.  Turn off the delay start feature if necessary. If this feature is turned on, the preset cook time will appear on the clock when you press the start button instead of starting the self-cleaning cycle. Press the "Off/Cancel" button to turn off this feature.

4.  Press the self-cleaning cycle and the start button again to turn on the self-cleaning cycle.

5.  Contact an authorized Kenmore service provider to repair your Kenmore oven if the self-cleaning cycle still does not function.

I am guessing that if this doesn't work you will be needing a new door-latch switch.  Click on the link below and you can pull it up.  
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
Read More
Larry L -
Sears Technician
July 24, 2013
See more answers
Q:

What does the error "E1-F3" indicate and how to fix it?

A:

The “E1-F3” error code is indicating a shorted Oven temperature sensor probe. The oven sensor probe will need to be tested with a volt/ohm meter. Unplug the range and remove the back panel. Unplug the oven temperature sensor probe and measure the resistance. It should have a resistance reading of approximately 1080 at room temperature. It is likely that you will read near zero ohms. The oven sensor probe will need to be replaced if it reads low resistance.

If the reading on the probe is normal, you will need to check the wiring between the probe and the control board. You can measure the resistance of the sensor circuit from the control board. If the resistance through this circuit measured through the wiring connection at the control board is okay, then you would need to replace the control board.

If you are not completely confident in your technical ability to safely access and diagnose these components, I recommend calling a service technician to repair the range.

If you need more help, resubmit your question with additional details.

Read More
Fred M -
Sears Technician
A:

just what I was looking for problem fixed Thanks

Read More
Anonymous -
February 13, 2011
See more answers

Top Parts