Model #66572029102 KENMORE Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Door Parts
    3 Results
  • Drawer & Broiler Parts, Miscellaneous Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Signal E1F2 66572029102 Kenmore Gas range

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your Range displays an error code and is not working properly. I did look into the model number you have provided and I have found information on those error codes.  The E1 F2 error code indicates that the touchpad ribbon connector is unplugged or damaged.  I would recommend having the touchpad ribbon connection checked. Let me know if this helps,

Click here for more information.

 

Thank you for your question. Have a great day.

 

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

model 66572029102 oven does not light

A:

It can be real frustrating when an appliance is not functioning correctly. I did some research for you at managemylife.com and found a similar question that an expert has answered. I hope this wil help until your expert can respond. I attached the link below.

Read More
James -
December 10, 2010
A:

The link is now attached. Hope this can assist you.

Read More
James -
December 10, 2010
A:

James R. provided a link for a previous answer regarding this problem. That previous answer correctly indicates that the spark igniter senses the presence of a flame through the ground circuit in the range. The tips provided in that previous answer may help you resolve this problem. Here is a link for a previous answer that contains additional technical information about this ignition system: Where can I find specific procedures for checking the control board functions on my Whirlpool gas range model TGS325MQ4? The range in this previous answer is slightly different than yours but the ignition system is exactly the same.

You can order parts from the [Sears PartsDirect | http://www.searspartsdirect.com?sid=MMLxexpertxmerch].

This ignition system is difficult to diagnose and repair. If the above information does not help, I recommend that you have a technician diagnose and repair the range. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 11, 2010
See more answers
Q:

Why does my Kenmore oven turn off after 5-6 minutes?

A:

The bake burner assembly has been improved to address this symptom. You will need to order part number 8190618 for the new & improved bake burner assembly with igniter. Another possibility is a bad EOC electronic oven control.

Read More
biker dave -
Sears Technician
November 21, 2009

Top Parts