Model #66572014103 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

Electronic Oven Control Board Kenmore Gas Range 6657201403 66572014103 Kenmore Gas range

Q:

I have e1 f3 on my panel, is that the sensor in the oven? does it need to be changed? 66572014103 Kenmore Gas range

A:

Thank you for choosing sears I would be happy to help you with your range. Upon researching model 66572014103; The E1-F3 fault code is indicating a shorted oven temperature sensor probe. The oven sensor probe will need to be removed and disconnected from inside the oven cavity and tested with Ohm meter. The oven sensor probe should have a resistance reading of about 1080 ohms at room temperature. If the oven sensor measures around the 1080 ohms, the sensor harness could be shorted somewhere between the oven sensor and where it connects on the oven control board. I have posted a link below of the sensor. Note: Unplug range before testing part or starting repair.

 

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
January 08, 2015
A:

Thank you for choosing sears I would be happy to help you with your range. Upon researching model 66572014103; The E1-F3 fault code is indicating a shorted oven temperature sensor probe. The oven sensor probe will need to be removed and disconnected from inside the oven cavity and tested with Ohm meter. The oven sensor probe should have a resistance reading of about 1080 ohms at room temperature. If the oven sensor measures around the 1080 ohms, the sensor harness could be shorted somewhere between the oven sensor and where it connects on the oven control board. I have posted a link below of the sensor.  Note: Unplug range before testing part or starting repair.

 

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
January 08, 2015
See more answers
Q:

Kenmore surface burners won't light 66572014103 Kenmore Gas range

A:

Thank You for choosing Sears PartsDirect.com. I regret to 
hear that you are having issues with your range  and do understand your frustration. Glad to help out. Im looking at your model number 66572014103 and from you are describing it seems like the spark module is bad or failing. You may also want to make sure that there is no build up or oil on the burner cap and the electrode itself as well. Somertimes oil gets in the part that the electrode creates the spark and will not ignite.  Being that all 4 do not work, you may want to test or replace the module. 
 
 
The oven lights with the ignitors which are different than the top burners. 
I have included a link to our PartsDirect page where you 
can purchase the part you need to complete your repair. 
Just click the blue link above to be taken to the page.

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com 

Read More
Sherman_G_Wallace -
Sears Technician
November 15, 2013

Top Parts