Model #66572014101 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer Amd Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't my oven reach proper temperature when bottom plate is installed? 66572014101 Kenmore Gas range

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com.
 
I am sorry and do understand your frustration when there is problems with the gas range.
 
Glad to help out.   Im  looking at your Kenmore Gas Range model number 66572014101.

You tested both ignitors and they are fine.   They have a good red flame?
 
If the oven is staying on a certain cycle like the preheat then the item to look at is the control board and or the wiring.   Check the board behind the control panel.   Open it up and see if any wires are burnt, broken, or bare.  Then if they look good, if you have a meter, you can test the wiring.   Most likely after that you will probably be needing a control board.

Control board for the model 66572014101

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsServiceCrew.com
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 18, 2014
Q:

How can I get the glass bulb cover to unscrew?

A:

The glass bulb cover should unscrew by turning it counterclockwise. You may need to tap on it with a wooden spoon to free it up from being stuck or use more turning force to unscrew it. You may try using a rubber jar lid grip to help grip and turn the glass cover. You could also try spraying a little silicone spray to help free it up.

Read More
Joey S -
Sears Technician
December 31, 2009
A:

Thank you so much! I've tried to get this cover off several times and, after reading your post, realized I was turning in the wrong direction. It's the simple things that usually trip me up. Used a rubber jar opener for traction and it came right off. Thanks again!

Read More
D C -
April 14, 2011
A:

Hello DC. Thanks for posting that information. Other readers may benefit from those tips.

Read More
Lyle W -
Sears Technician
May 09, 2012
A:

What do you do if your tempered bulb oven cover is rectagular and not round?

Read More
Jim Rowe -
January 15, 2013
A:

Hello Jim Rowe. That rectangular bulb cover may have tabs that need to be released. Reply with the model number of your range and we will try to help you remove that cover.

Read More
Lyle W -
Sears Technician
January 16, 2013
See more answers
Q:

error code Red E2 and Green F2 66572014101 Kenmore Gas range

A:

Error codes can be confusing.I was able to locate a similar question with an attachment that defines the error codes for this model. I attached to the link below . I hope this helps while you wait for the expert.

Read More
Barbara -
November 25, 2012
A:

I know that it can be very difficult to the issues with your range. However, there is not a F2-E2 fault code listed in the technical data sheet. Generally speaking, if it has an F2 as part of the error code displayed would relate to a keypad issue.

I added the complete list of the Failure Error Display Codes in the image below. I recommend calling a service technician to diagnose and repair your range. If you would like to schedule service, just click on this link: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 26, 2012
See more answers

Top Parts