Model #66563793302 KENMORE ELITE Microwave/Hood Combo

  • Control Panel Parts
    3 Results
  • Door Parts
    3 Results
  • Interior And Ventilation Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Magnetron And Turntable Parts
    3 Results
  • Cabinet And Installation Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Microwave Grill Vent

A:

Replacing a grill vent on a microwave may seem like a difficult task without the proper istructions.  While you are waiting for an expert to respond, I have added a helpful link (click here) that may provide information to assist you with your question.

Read More
Yadira B -
July 17, 2013
A:

Thank you for contacting ManageMyLife.com regarding reinstalling the grille vent on your Kenmore Elite microwave. I see Yadira provided you with great information.

According to page 22 of the owner's manual, "Slide the top of the vent grille into place. Push the bottom until it snaps in place."

I really hope this information helps you today. Thank you for using ManageMyLife.com.

Read More
Korinna S -
Sears Technician
July 17, 2013
See more answers
Q:

door handle for microwave

A:

I am sorry you are experiencing difficulties with your Microwave. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage and a microwave shielding leakage test must be performed using a survey meter after any microwave service. I strongly suggest that you have this repair handled only by a qualified service technician. I have provided a link To Sears Home Services if you decide to schedule service. If you think it may be cost effective to just replace the unit, I have also provided a link to the Microwave section of Sears.com to price out what a replacement would cost.

Read More
Alina F. -
December 09, 2011
A:

Thank you for your question.

Replacing a door handle on most appliances is no big deal but a microwave is not the usual appliance. Replacing the door handle is a repair that should only be completed by a service technician. Disassembling the door would involve removing the microwave shielding components. A technician will need to remove these parts, replace the handle, and then reassemble the door. A microwave radiation leakage test must be performed on the door using proper testing equipment before the microwave can be safely returned to service.

I recommend calling a service technician to install the door handle. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 10, 2011
See more answers
Q:

Kenmore Elite (Ultra heatwave Technology) Microwave

A:

When a appliance that you use in a daily basis starts malfunctioning its very frustrating, as a suggestion to help you while you are waiting for the experts advise, I have included below a couple of links to Manage my life were some customers had posted similar questions like yours. Hope it helps!

Read More
Priscilla V -
April 27, 2011
A:

Thank you for your question.

I can understand you wanting to get the microwave part of your appliance working again.

Since you said all the other functions work I would have to conclude that some component in the magnetron power heating circuit has failed.

It could be a thermal fuse, or one of the inverter boards.

Are the fan/ light and turntable operating when you push the microwave start button? Does it sound like it would be working but is not cooking? If it does then I think you will need a microwave technician to see what the problem is with it not cooking.

Because this is an internal problem I must inform you that Microwaves are inherently dangerous to service. They contain high voltage internal component that can retain a lethal electrical charge even when the microwave is completely unplugged. A microwave shielding leakage test must be performed on the unit using proper testing equipment following any internal component access or repair before the microwave can safely be returned to service. These are the reasons why I recommend that you have a service technician repair this microwave failure.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 28, 2011
See more answers

Top Parts