Model #66563792305 KENMORE ELITE Microwave/Hood Combo

  • Control Panel Parts
    3 Results
  • Door Parts
    3 Results
  • Interior And Ventilation Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Magnetron And Turntable Parts
    3 Results
  • Cabinet And Installation Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

What Does F2 Error Code Mean? 66563792305 Kenmore Elite Microwave/hood combo

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
May 21, 2013
A:

Thank you for contacting ManageMyLife.com regarding the F2 error code on your Kenmore Elite microwave hood combo. I know error codes can be frustrating and I'm happy to help you today.

This error code indicates an issue with the touchpad and the control board. You can try resetting the unit by disconnecting it from the outlet or by switching off the designated circuit breaker for 2-3 minutes, then restore the power. If the reset doesn't help, there may be an issue with the touchpad or the control board needing to be replaced.

Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as replacing fuses, can cause microwave leakage. A microwave shielding leakage test MUST be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend that you have this issue serviced by a qualified repair technician. Service can be scheduled at Sears Home Services.

We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future. Thank you for using ManageMyLife.com.

Read More
Korinna S -
Sears Technician
May 22, 2013
See more answers
Q:

What does "F7" error code mean on my microwave?

A:

The "F7" error code means the power supply to the magnetron was interrupted. We do not assist in repairing microwaves. Microwaves inherently store 20,000 volts of electricity even when the microwave is un-plugged. Repairing microwaves require proper training and knowledge of operation. I do not recommend attempting to diagnose and repair your microwave.

I recommend calling a service technician to diagnose and repair your microwave.

Read More
Joey S -
Sears Technician
November 02, 2009
Q:

What does an F7 code mean on my Kenmore model 665.63792305 microwave and how can I repair it?

A:

The F7 code indicates the power to the magnetron was interrupted. This might be a problem with the inverter or even the door switches.

Microwaves are not good do-it-yourself projects. Microwaves are inherently dangerous to service. Internal capacitors can retain a lethal electrical charge even when the microwave is unplugged. A microwave radiation leakage test must be performed on the unit following any repair.

I recommend calling a service technician to repair this type of problem.

Read More
Fred M -
Sears Technician
October 24, 2009

Top Parts