Model #66563792300 KENMORE ELITE Microwave/Hood Combo

  • Control Panel
    3 Results
  • Door
    3 Results
  • Interior And Ventilation
    3 Results
  • Air Flow
    3 Results
  • Magnetron And Turntable
    3 Results
  • Cabinet And Installation
    3 Results
Find part by diagram >

Question and Answers


What does a flashing F7 error code indicate on my Kenmore Elite microwave hood model 665.63792300?


The F7 error code indicates an inverter failure. You can try unplugging the microwave and leaving it unplugged for at least 1 minute. This may clear the error code so that the microwave will resume normal operation when plugged back in. If the error code returns, then the microwave will need to be serviced by a technician. Only technicians should work on microwaves because the unit has capacitors that can retain an electrical charge even when the unit is unplugged. Also, a microwave radiation leakage test must be performed on the unit using proper testing equipment following any internal component repair.

Read More
Lyle W -
Sears Technician

Top Parts