Model #66561609100 KENMORE Microwave/Hood Combo

  • Control Panel
    3 Results
  • Door
    3 Results
  • Interior And Ventilation
    3 Results
  • Air Flow
    3 Results
  • Magnetron And Turntable
    3 Results
  • Cabinet And Installation
    3 Results
Find part by diagram >

Question and Answers

Q:

While using microwave an F6 code appeared on display. 66561609100 Kenmore Microwave/hood combo

A:

Thanks for the inquiry and for being a valued member. 

I am sorry to hear of the issue you're having with the microwave not heating. I know how frustrating that is to have happen.

We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage, and a microwave shielding leakage test must be performed using a survey meter after any microwave service. That's why I strongly warn you to have this repair handled only by a qualified service technician.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Jr -
Sears Technician
November 28, 2014
Q:

kenmore microwave

A:

Having an error code on an appliance can be inconvenient and keep your appliance from working properly and I will be happy to help. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
July 20, 2011
A:

The "F6" failure code implies a microwave relay failure. This failure will generally require replacing the Electronic Control Board. NOTE: Do not attempt to access and replace the Electronic Control Board. Microwaves inherently store huge amounts of voltage (10,000 volts) even when unplugged from the power source which can cause severe bodily injuries or could be fatal. Microwaves should only be diagnosed and repaired by service technicians with the proper knowledge and training.

If you would like to schedule an appointment to have a technician go out to your home to repair your microwave please visit www.SearsHomeServices.com for further assistance in scheduling an appointment.

Read More
Luis L -
Sears Technician
July 21, 2011
See more answers
Q:

How do you install a new light bulb in this microwave oven. (Inside of the unit)

A:

Hi there, As the light bulb is inside the unit, safety may be an issue. I see that someone asked a similar question previously. I attached the link below.

Read More
Barbara H. -
July 09, 2010
A:

The inner light on a microwave is an internal component that must be replaced by a certified service technician. It requires the unit to be disassembled to replace the bulb. High voltage internal components in the microwave retain a dangerous electrical charge even when the unit is unplugged. A radiation shielding test must be performed on the unit using proper testing equipment following all internal component repair. I have provided a link that has drop-off location information: Sears Home Services

Read More
Rgabriella02 -
Sears Technician
July 13, 2010
See more answers

Top Parts