Model #66560652000 KENMORE Microwave/Hood Combo

  • Control Panel
    3 Results
  • Door
    3 Results
  • Interior And Ventilation
    3 Results
  • Air Flow
    3 Results
  • Magnetron And Turntable
    3 Results
  • Cabinet And Installation
    3 Results
Find part by diagram >

Question and Answers

Q:

I have this microwave Model #665.60652000. When I try to warm up somthing it just makes a loud humming noise. The timer still works for the microwave doesn't 66560652000 Kenmore Microwave/hood c...

A:

Thank you for choosing SearsPartsDirect. I know how much a time saver a microwave is and know you want to get it working quickly. In this case, I would suggest you have a qualified technician test or replace the unit.

Unfortunately, we cannot give advice on repairing or troubleshooting the microwave because they contain high voltage internal components that can retain lethal electrical charge even when the microwave is off. So for safety reasons I would recommend having this repair done by a qualified technician. You can schedule service at www.Searshomeservices.com

Thank you for your understanding on the situation. Have a great day.

Read More
Benny23 -
Sears Technician
July 10, 2015
Q:

I need a new door frame. There are 4 different frames shown #10, #10A, 10B, etc. My microwave is white Which do I need? 66560652000

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the door part for your Kenmore microwave model 66560652000. I am so sorry the door frame needs to be replaced. I will be happy to help you with this. I have located the door frame in white. It is key 10. I have included the link below for you to order the part.
 
 
I know what a time saver the microwave is and I am sure you want the door fixed quickly.  In this case I recommend you have the microwave serviced by a qualified technician. We do not give diagnostic or repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the power supply. Special equipment is needed to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after ANY/ALL microwave service. 
 
For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project. 
 
Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.
 

Read More
Rachel Morgan -
Sears Technician
April 20, 2015
Q:

How do you UNinstall this unit? 66560652000 Kenmore Microwave/hood combo

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize we only have the installation instructions, in which, should help uninstalling the unit.

You will need a service technician to uninstall the unit.

 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

 

Read More
Natasha12 -
Sears Technician
December 05, 2014
A:

Wow, that may have been the poorest canned response possible. Thanks for nothing.

Read More
David -
December 05, 2014
See more answers

Top Parts