Model #66517844400 KENMORE Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Dishrack And Water Feed Parts
    3 Results
  • Lower Dishrack Parts
    3 Results
  • Cabinet Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What needs to be taken apart to Replace Filler tube assembly? 66517844400 Kenmore Dishwasher

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to replace the tube on your dishwasher. 

We will need to know what tube you are trying to replace. The water tube, manifold tube, or feed tube. Usually when you put the part numbers in youtube a how to video comes up. Please respond to the specific tube you are referring too.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
December 29, 2014
Q:

replacing detergent dispenser lid on Kenmore diswasher

A:

Replacing detergent dispenser on dishwasher can be quite a challenge when your not a handy person, A suggestion I have while you are waiting on an expert, Provide your model number so you can get a better answer from the experts. I also found a similar question on replacing dispenser. I attached the link below. Hope this guides you to the correct answer.

Read More
Dezeray S -
October 20, 2010
A:

thanks ... the model is Kenmore 1551590 ... it is an older model ... 1992 I think

Read More
LMSSVS -
October 20, 2010
A:

It's very hard to explain in words how to install the lid. A picture is worth a thousand words so I added a couple of links below with images and some general instructions.

I would like to know how to properly reinstall the soap dispenser cover and its associated spring and pin on my 665-17844400 Kenmore Dishwasher.

How do I install the spring for the soap cup on my dishwasher?

Read More
Joey S -
Sears Technician
October 21, 2010
See more answers
Q:

I would like to know how to proporly reinstall the soap dispenser cover and its associated spring and pin on my 665-17844400 Kenmore Dishwasher.

A:

Hello, I can see you are having trouble finding instructions to install your soap dispenser. If youw would like you may go to the top of the page of manage my life and go to the manuals tab. Just make sure you have your maodel number handy. I hope this helps.

Read More
Flo R -
July 12, 2010
A:

Thanks for the comment but the manual which the site directs you to is the same as that provided with the dishwasher and are installation and usage manuals, There are no repair directions provided for any part of the dishwasher. Unfortunately, it seems that there is some "little trick" to getting the spring installed so that the door is preloaded to open when the latch is released. I think that is what I need to know.

Read More
mustng68 -
July 13, 2010
A:

Hopefully the images below are worth a 1000 words.

The hinge pin will have to be bowed a little to get it to fit. Insert it all the way to one side first then carefully bend it slightly till it will fit into the other side.

Letting the pin soak in hot water would make it a little more pliable.

Read More
Fred M -
Sears Technician
July 15, 2010
See more answers

Top Parts