Model #66517808890 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

12 year old Kenmore dishwasher model 665.17808890

A:

A leaking dishwasher isn't the best way to start off your Monday morning. No worries the experts here on Manage My Life are great and offer very helpful advice. It usually takes 24-48 hours to receive a response. Have a great day!

Read More
Jackie S -
June 13, 2011
A:

Hi Barbara,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your dishwasher.

From your description your dishwasher may have an inlet valve that is stuck open. An easy way to check this is with your dishwasher off, turn the water back on. If water starts coming in then the valve needs to be replaced. If water does not start running you could have an issue with the electronic controls or intermittently sticking valve.

Here is a link that you may use for parts purchases Sears Parts Direct .

The remaining checks will require the use of an ohm/volt meter. If you have a meter and are confident in your ability to safely perform these checks, reply to this post and I will be happy to assist you in any way I can.

If your inlet valve is intermittently sticking open and you continue using the dishwasher it could flood the house if left unattended. I highly recommend having a trained service technician evaluate this problem. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
June 14, 2011
See more answers
Q:

Can I use Sears mounting bracket 4378968 to side mount a Kenmore 66517808890 Dishwasher?

A:

The 4378968 bracket is a good part for this dishwasher but it is a floor bracket and your asking about if it will side mount.

The brackets are designed for a floor mount and that would be the preferred mounting if the counter top is not available.

I hope this information is helpful to you and if the countertop is not available the 4378968 bracket kit is the way to mount the dishwasher and I cannot recommend any variation of the mounting.

Read More
Fred M -
Sears Technician
December 12, 2009

Top Parts