Model #66517791791 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous Parts
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dishwasher tub material?

A:

Good morning Robert.... I can fully appreciate the practical question you pose. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
March 29, 2013
A:

I can understand how important it is to have the right information for your dishwasher. However, the information that you need is not available to us. This is only available at the manufacturer level.  There is a way to fix the pin-hole in the tub.  Just follow these directions and it will stop leaking:
  1. Open the door of the dishwasher and remove the racks from inside.
  2. Clean the area of the of the tub that is cracked using cleanser and a scrubbing pad. Rinse with clean water and let the tub dry for 24 hours. 
  3. Squeeze some clear silicone onto your finger from a squeeze tube or caulk gun, depending on the style of silicone being used.
  4. Wipe the silicone over the area of the crack and 1 inch beyond it in all directions. Smooth the caulk so there are no globs or ridges. Allow the silicone to dry overnight.
  5. Apply another coat of silicone and let it dry overnight. This will ensure that the crack is sufficiently sealed to prevent water from penetrating it.

I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
March 29, 2013
See more answers

Top Parts