Model #66517722K900 KENMORE Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Spray Arm Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Dishrack Parts
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Diagnostic mode 66517722k900 66517722K900 Kenmore Dishwasher

Q:

Is there a converstion kit? 66517722K900 Kenmore Dishwasher

A:

Thank you for choosing Sears PartsDirect.com. Glad to help out. I’m looking at your model number 66517722k900 and there is a conversion kit for this model. The part number for the white conversion is 675778 and 4317856. They show is no longer being available through our site. You may try searching online for a third-party vendor that may carry the part or something similar. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 31, 2014
Q:

how do i install the fill a nd drain hose on a kenmore 66517722K900 dishwasher?

A:

Managemylife.com is the place to go for information on installation of the drain and fill hose for the Kenmore dishwasher. I have located an installation guide on managemylife.com and I am providing you the link. Hope this helps, if you need additional help click on reply with your questions.

Read More
Anna T -
March 06, 2012
A:

thank you, but i have those, those are just the instructions to intially install the dishwasher. i need the instructions to replace the fill and drain hose. thank you for your help though! :)

Read More
charlene -
March 06, 2012
A:

Hi Charlene,

Thank you for submitting a question to Manage My Life.

I assume this dishwasher is set up as a portable to attach to the sink faucet. Here are the basic instructions for this procedure:

  1. Unplug or de-energize the dishwasher.
  2. Remove all the cabinet screws.
  3. Remove the top.
  4. Remove the two hoses, one has a hose clamp that needs to be unscrewed the other was standard hose attachment (like a garden hose). NOTE: Place a shallow pan or towels under the hose area when you remove them.
  5. Take note of the routing of the old hoses.
  6. Attach the new fill/drain hose.
  7. Reassemble in reverse order.


I added some images below that may help you with this.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
March 07, 2012
See more answers

Top Parts