Model #66517722000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Dishrack
    3 Results
  • Cabinet
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Under counter/flush mount kit 66517722000 Kenmore Dishwasher

A:

Thank you for being Sears' valued member and for contacting SearsPartsDirect.com with your question about a mounting kit for your Kenmore dishwasher model 66517722000. I will be happy to help you with this. I have located an under the counter mounting kit for you and included the link below for you to order it. 

Dishwasher Mounting Kit

I hope this answers your question. If you need further assistance, please repost your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
October 04, 2014
Q:

How to install a new power cord on a Sears free standing dishwasher?

A:

The power cords can be replaced on Kenmore dishwashers. I am providing a link with a similar question on power cords for other dishwashers. To better assist your please submit the part number you are replacing. Click on reply with additional information. An expert will be with you shortly.

Read More
Anna T -
May 18, 2012
A:

part # is 3371542

Read More
Anonymous -
May 18, 2012
A:

Wiring can be tricky sometimes and I will be happy to assist with installing the power cord. First, disconnect power before attempting any repairs. Then remove the top and front access panel. Open the dishwasher door and remove the screws, key #11 holding the top of key #14 in place and slide the top off. Next, remove the screws key #3, key #13 and remove the inspection panel key #12. You can now unplug the quick disconnect and remove the ground wire for the power cord at the terminal box. Pull the old cord out of the hose housing assembly key #8. Then replace the new cord in the reverse order. If you are not comfortable with performing this repair, please schedule for service. Also, be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. You can schedule for service online with our Sears Home Services team. I hope this information helps. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
May 21, 2012
A:

thanks for the input, I have a built-in so there must be another way to get into it without removing the cover and since its new I have no other cord to look out

Read More
tommy green -
July 18, 2012
A:

Tommy, you're going to have to move the unit out either way to perform this repair. Try removing number 19 and see if you can see the wiring connects through that access point for the power cord. If not then you'll to remove the top to see the connects. Please reply back with your results. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
July 18, 2012
See more answers

Top Parts