Model #6651765592 KENMORE Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Dishrack Parts
    3 Results
  • Cabinet Parts
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Leaking portable Kenmore dishwasher

A:

Once you know where the leak is coming from on the Kenmore dishwasher, the rest may be easy to repair. I am providing a link to searspartsdirect.com where you can see the breakdown of the dishwasher. An expert will respond to your specific question within 24-48 hours.

Read More
Anna T -
July 06, 2012
A:

I know that it can be very frustrating to have your connections leaking on a portable dishwasher. In order to fix this, however you will need to replace the washer and bushing in the adapter. These can be difficult to replace individually, so I would recommend that you replace the adapter itself. It comes in one assembly so it will be easier for you to replace. The part number for the adapter is 713750. If you want just the washer, you need part number 713747. If you would like to order the parts, just click on this link: Sears Parts Direct . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 09, 2012
See more answers
Q:

kenmore ultra wash II dishwasher pressed heat water and now have no power at all

A:

Having a Dishwasher that works correctly is the best thing that anyone can have. I found this really great link on why your Dishwasher might have stopped. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
October 06, 2010
A:

From the description you give you used the hi-temp wash cycle with water heat and now the unit is completely dead with no power at all.

This model 665.1765592 has a mechanical timer and doesn't have a thermal fuse.

I would suggest you first check the junction box or the dishwasher. It is located behind the lower access panel.

Remember to turn the power to the dishwasher off first.

Check the wire connections and the wire nuts are tight. With the water heat the wires might have separated.

If nothing changes then I suggest you get access to a volt meter so voltage can be checked if you're comfortable using a meter.

If you have no meter and nothing works then the timer is most likely at fault.

I hope this information is helpful to you. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
October 06, 2010
See more answers

Top Parts