Model #66517593202 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dishwasher keeps running

A:

I understand how important it is for your dishwasher to be shutting off properly so that you are not wasting any electricity and I will be happy to help you. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem: http://www.managemylife.com/mmh/questions/135714-why-does-my-bosch-dishwasher-model-shu6800-not-turn-off-at-the-end-of-the-cycle-and-just-display-the-number-1. I hope my link is useful.

Read More
Joseph P. -
November 06, 2010
A:

I understand your concern and I need to inform you as part of normal operation, the dishwasher pauses 2 or 3 times during the cycle for thermal holds and advances once temperature is met.

I listed some causes below if the dishwasher never advances after giving it plenty of time to heat the water.

  • Lack of water
  • Wash pump not pumping water so it cascades over the heating element.
  • Low inlet water temperature- Confirm water temperature at sink (recommend minimum of 120� F). Run water at sink before running dishwasher.
  • Dishwasher connected to cold water instead of hot.
  • Problem with temperature control devices or circuit- Loose connection(s), Thermistor problem, Problem with thermistor input on control. The thermistor should have a resistance measurement of 48-52K ohms at 77 degrees.
  • Heater problem- Open connection or component in heater circuit, Open in heater, Faulty heater drive circuit on control.

I added the complete troubleshooting information in the image below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services

Read More
Joey S -
Sears Technician
November 08, 2010
A:

HELLO

Read More
robert803 -
March 13, 2013
See more answers

Top Parts