Model #66517539201 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is the washer arm on upper rack is not rotating? 66517539201 Kenmore Undercounter dishwasher

A:

I know that it can be very frustrating to have issues with your dishwasher. When you slide the upper rack in position be sure the manifold hose docks up to the feed tube assembly. The probe will open up the port that the water to the upper spray arm receives. This is the only way the upper spray arm will rotate. What usually happens is the holder for the manifold hose breaks & when you slide in the upper rack it misses the port of the feed tube. Other possibilities are; low water pressure, cracked spray arm or obstruction of the rotation. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 09, 2013
A:

What would be the cause of low water pressure? I had a repairman come to my house to trouble shot the problem but I was not able to be there when he was here and my brother, who only wanted to get a new one, refused the repair. I pay the bill not him and I wanted a written estimate of what the repairs would be. I called and asked for a written estimate of the repairs and was told that it might not be possible to get one. How can that be when the sales slip for the house call says that if I change my mind and decide to have the work done that a 50% discount will be applied. I paid $118.37 for something I did not get. I would like the repair mans estimate. His tech ID is 0706325, the service order # 41258932. The spray arm is not cracked and it mates to the manifold just fine.

Read More
Virginia -
October 10, 2013
A:

The problem that you are having with your dishwasher is most likely due to the water pressure. This does most likely mean that the pump is causing the problem. However, it is best you have someone come out a check it. I would suggest that you call 1-800-469-4663 and let them know you want the repair done. There should be not problem with this. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
October 13, 2013
See more answers
Q:

Why is my Kenmore dishwasher not draining?

A:

This model of dishwasher has a separate pump that drains all of the water out. I would start out by disconnecting the drain hose under the sink & checking the drain pipe. If that checks okay, you will need to remove the lower front access panel of the dishwasher & check the drain pump out.

Read More
biker dave -
Sears Technician
November 17, 2008

Top Parts