Model #66517473300 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore dishwasher, need replacement scamatic for replacement of rope in door hinge system.

A:

Dishwashers are the best appliance to have in our homes, but when it starts to have issues it can be really frustrating. While you are waiting on an expert to answer your question, I suggest to set service with a sears technician. I have attacehd the link below. Hope this helps!

Read More
Dezeray -
September 24, 2012
A:

Thanks for the question about the door closing system on your Kenmore dishwasher. I have found a link to a previous answer that provides guidance on this matter. Click on the link to view. Should you need additional help reply with details.

Kitchenaid dishwasher door spring is broken



Thanks Ron H.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Ron H -
Sears Technician
September 26, 2012
See more answers
Q:

My Kenmore Elite dishwasher used to run great. Lately the wash cycles have been very noisey. Today the water stopped pumping. Bad motor? How do I tell?

A:

I can understand how much it is an inconvenience when your appliance is no longer working as desired. I was able to find a similar question like yours, the question was answered by an expert that provided general information. http://www.managemylife.com/mmh/questions/122766-kenmore-dishwasher-loud

Read More
celene -
November 05, 2010
A:

From the description you give I suspect something is in the sump of the dishwasher causing circulation problems. There may be something jamming the pump if circulation just stopped.

The image below will help you get into the pump and check for any obstructions.

If nothing is there then the motor is most likely the problem. The 2nd image shows how to remove the circulation motor.

I hope this helps. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
November 06, 2010
See more answers

Top Parts