Model #66517463300 KENMORE Dishwasher

  • Door And Panel
    3 Results
  • Control Panel
    3 Results
  • Door And Latch
    3 Results
  • Lower Washarm
    3 Results
  • Heater
    3 Results
  • Fill And Overfill
    3 Results
  • Tub And Frame
    3 Results
  • Pump And Motor
    3 Results
  • Upper Rack And Track
    3 Results
  • Upper Wash And Rinse
    3 Results
  • Lower Rack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Heating Element/Kit 66517463300 Kenmore Undercounter dishwasher

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about a part for your Kenmore dishwasher model 66517463300. I am so sorry the heating element needs to be replaced. I will be happy to help you with the replacement part. If your dishwasher has a stainless steel tub, the replacement element part number is 8194200. If the tub is plastic, order part number 8572861. Both parts are available on www.SearsPartsDirect.com. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME).

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
March 18, 2015
Q:

Blinking Clean Light 66517463300 Kenmore Undercounter dishwasher

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dishwasher.

From the information you have provided above, blinking clean light usually indicates an issue with the dishwasher heating circuit, control board or door switches. You might want to run a few diagnostics with an ohms/volt meter on these parts. If you do not feel comfortable doing this test yourself you can set up a service call at 1-800-4MYHOME.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
December 29, 2014
Q:

dishwasher 665.17463300 wont start 66517463300 Kenmore Undercounter dishwasher

A:

Thank you for choosing SearsPartsDirect.com.  I can certainly understand how frustrating it can be when your dishwasher is not working properly.  I did look into the model number you have provided, and I have found information to assist you.

 In order to diagnose the failure will require disconnecting the thermal cut off (TCO) and checking it with an ohm meter for continuity. You will also need to check and confirm the voltage supply to the control board. The control board needs to have 110-120vac when measured across P2-6 and P7 and 110-120vac when measured across P8 and P7. You locate the thermal fuse (TCO) by tracing the Black wire with a White stripe from the door switch. The thermal fused will be located on the edge of the circuit board housing. It will have a black and black wire with a white stripe connected to it. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
August 05, 2014

Top Parts