Model #66517263402 KENMORE ELITE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

No Lights....no power 66517263402 Kenmore Elite Dishwasher

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dishwasher is not working properly.

I have attached testing information for your dishwasher. 


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 27, 2015
A:
Natasha12 -
Sears Technician
July 27, 2015
See more answers
Q:

Kenmore Elite Blinking Light After 21 Minutes 66517263402 Kenmore Elite Dishwasher

A:

Thank you for choosing sears I would be happy to help you with yourdishwasher. Upon researching model 66517263402; the clean light blinking 7 times normally indicates that there is a water temperature problem. You can try resetting the unit by unplugging the dishwasher power cord then reapplying the power, then pressing the buttons in the following order: “heated dry”, “normal wash”, “heated dry”, “normal wash”. Then the unit will reset for the next 13 minutes. After reseating the unit if that does not solve the problem you may need to replace the thermistor (the thermistor is different from the thermostats. I have posted a link of the thermistor, to view the link click here.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
February 18, 2015
A:

Thanks. I already tried the button pressing without success. We make it through the first few cycles before a shutdown. Would a faulty thermistor fail on the first cycle?

Read More
Jeffrey -
February 18, 2015
See more answers
Q:

Kenmore Elite Blinking Light After 21 Minutes 66517263402 Kenmore Elite Dishwasher

A:

Thank you for choosing sears I would be happy to help you with yourdishwasher. Upon researching model 66517263402; the clean light blinking 7 times normally indicates that there is a water temperature problem. You can try resetting the unit by unplugging the dishwasher power cord then reapplying the power, then pressing the buttons in the following order: “heated dry”, “normal wash”, “heated dry”, “normal wash”. Then the unit will reset for the next 13 minutes. After reseating the unit if that does not solve the problem you may need to replace the thermistor (the thermistor is different from the thermostats. I have posted a link of the thermistor, to view the link click here.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
February 18, 2015

Top Parts