Model #66517039401 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

665.17039401. Detailed steps to remove and clean chopper blade? tx 665.17039401

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dishwasher.

From the information you have provided above,  I have located an instruction video on how to replace the chopper assembly. Please click here for the video.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
December 31, 2014
Q:

only two ro three of the lights on the display panel will light up and start is not one of them so it does not start. 66517039401 Kenmore Dishwasher

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number 66517039401 and from your description I would test the door switches and verify that they are functioning properly. If the switches test functional, you may have an issue with the electronic control for the dishwasher. I recommend having a service technician diagnose the problem if you do not feel comfortable with testing or making repairs. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 10, 2014
Q:

Dishwasher Door does not close 66517039401 Kenmore Dishwasher

A:

Thank you for choosing SearsPartsDirect.com.  I can certainly understand how frustrating it can be when your dishwasher will not latch. I did look into the model number you have provided, and I have found information to assist you.

 It sounds to me like the door switch is not telling the latch to lock. You will need to do the proper tests with a multimeter to determine which part to replace. 

The door latch is mechanical but it there is a couple of door switches sitting in it. If the spring is missing then you will need to replace the latch bolt assembly. You should also check the latch plate located above the latch assembly at the front center area of the tub. Make sure the latch is not bent too far up or down or the door will not latch.

This is the part number for the switches in your door latch 
8269209. 

Click here for a list of videos. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".

Read More
HFederico -
Sears Technician
August 11, 2014

Top Parts