Model #66517032401 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

The hinges on the door to the dishwasher are weak 66517032401 Kenmore Dishwasher

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

Yes, it does sound like the spring. The springs are suppose to balance the door so it does not slam open. 
 
8524473 is the part number and I recommend replacing both.




 You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 09, 2015
Q:

green blinking light 66517032401 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 66517032401; to reset this model you need to unplug the dishwasher power cord for 5 minutes and then reapply the power.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 23, 2015
Q:

STAR BOTTOM 66517032401 Kenmore Dishwasher

A:

Thanks for the inquiry and for using SearsPartsDirect.com. I am sorry to hear that the Start and Cancel buttons are not lighting up, I know how frustrating that is to have occur.

You never mentioned, but do the buttons work at this point, or do they not work? Typically, if they don't work, but the other buttons do light up, it indicates a stuck key in the keypad or a shorted key pad, and the console or control panel would need to be replaced. I don't know if a control board would solve the problem for you.

One thing to try is to access the interface and unplug it from the control board and then plug it back in and see if the problem happens again. Once unplugged, you can clean the contacts on the connector. Once plugged back in, it may have a better connection and work again without replacing any parts.  Just make sure you unplug the dishwasher from the power outlet before accessing and unplugging the ribbon from the control panel to the electronic control board. 

Outside of that, a multimeter would be needed to test for continuity between the board and the control panel, which is usually best left to a technician with extensive knowledge in electrical component testing and troubleshooting. Sears does not recommend customers testing live circuits.  

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service.

Thanks again for the inquiry and for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 11, 2013

Top Parts