Model #66517024402 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


What might be wrong with a Kenmore model 66517024402 dishwasher when it was making terrible noises during washing until I checked the grinder and reassembled it but now it hums and doesn't turn at ...


Checking and replacing the grinder would not normally cause the motor bearing to fail and it is most likely bad timing for it to go completely bad right after you check the grinder.

You are correct it is much easier to replace the entire sump assembly than just the motor and would be a good do-it-yourself project.

The image below will help with this. It is not required to uninstall the dishwasher to change the sump assembly but it would provide easier access. Remember to turn the power off first.

There is only about a $30 dollar difference between the price of the sump assembly and the motor and I would recommend the sump assembly.

I hope this information is helpful to you but submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
January 27, 2010

Top Parts