Model #66517023402 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Cleaning light is flashing, and will not let me start a new cycle.

A:

Appliances have minds of there own so when this happens it can be really frustrating. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician so they can fix this appliance. I have attached the link below. Have a nice day!

Read More
Dezeray S -
September 20, 2011
A:

The blinking clean light indicates a heater circuit failure. This can be caused by a failed heating element or a number of other component problem. Check the heating element for any visible signs of damage or failure. If you do not see any apparent problem, you can reset this fault code by pressing the following buttons in this order (this key dance should be completed within about 5 seconds): HEATED DRY - NORMAL WASH - HEATED DRY - NORMAL WASH.

If this key dance is completed properly, all of the console lights will turn on for a few seconds and then shut off. The dishwasher will then begin a short diagnostic cycle. You can cancel this cycle with the CANCEL button. Try a test cycle and see if the heating element is working properly. If the heating element works properly and the blinking clean light does not return, you should be able to continue safely using the dishwasher. You may have received the code due to a low water level fill. Monitor the performance of the dishwasher. If the flashing clean light returns or you suspect any other problems, I recommend calling a service technician to examine the dishwasher.

Read More
Bobby B -
Sears Technician
September 22, 2011
See more answers
Q:

How do I install the dispenser (8558129) on a Kenmore under the counter dishwasher (Mod. 665.17023402)? Where do I locate the proper manual?

A:

That's great to hear that you are wanting to do a repair on the dishwasher on your own. I have found a similar question that was asked. The expert replayed with great detailed information, i hope that the information is helpful and informational.

Read More
celene -
March 01, 2011
A:

Thank you for your question.

I have searched and found a video that I think you will find helpful on replacing the dispenser. Please click on this link to watch the video . Please make sure to unplug or turn the power off to the dishwasher before you attempt any service.

Please let me know if you need further assistance repairing the dishwasher.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 02, 2011
See more answers
Q:

Dishwasher Door Flops Open

A:

When it comes to a appliance we use in a daily basis and it starts malfunctioning it can definitely be frustrating for you. While you are waiting for the experts response I have provided you below a link to Manage my life where a expert answer a similar question that will helpful to you. Hope it helps!

Read More
Maira E -
October 04, 2010
A:

From what you described it sounds like you will need to replace both door springs. The door springs is the only device to keep the door from falling when the door is unlatched; nothing else is involved in keeping the door up. I recommend replacing the door springs.

Remember to disconnect power to the dishwasher before attempting access.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
October 05, 2010
See more answers

Top Parts