Model #66517013400 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

interpreting diagnostic test cycle on model 665 dishwasher 665.17013400

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

There is not a specific test cycle for this unit after resetting an error code. You would need to perform the diagnostics test to determine if the issue was resolved.

 
NOTE 1. To start the Service

Diagnostics Cycle, press the
following keys, in order, in less than 6
seconds, while in standby:
Heated Dry, Normal, Heated Dry,
Normal

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 06, 2015
Q:

I have a blinking code above my clean button 66517013400 Kenmore Dishwasher

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Dezeray -
March 30, 2013
A:

That is where I posted this question...

Read More
BRANDON -
March 30, 2013
A:

Thank You for Submitting your question to ManageMyLife.com

I can understand your frustration when you dishwashers not working properly. I know I hate washing dishes by hand. After researching your model I found out that the flashing clean light could mean several different issues. It is not specific to a single problem. What I recommend is to have a service technician come take a look at your dishwasher, so you not wasting money on parts you don't need. Just click the blue link below to schedule service.

Sears Home Services

Read More
Desirea -
Sears Technician
March 31, 2013
See more answers
Q:

Do I need to replace the third level spinner if it will not stay secured?

A:

If the third level spinner will not stay attached, replace the third level spinner and the retainer assembly, part #8193983. The problem is likely the retainer pins but you can't get it by itself.

Read More
Joey S -
Sears Technician
December 30, 2009

Top Parts