Model #66516989201 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts And Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why does the clean light stay lit on my Kenmore dishwasher?

A:

That test sequence is to reset a "blinking" clean light only. The test is not for your model dishwasher.

You did not indicate but I will assume the "Clean" light is ON constantly and flashing or blinking ON and OFF.

Your model dishwasher does not pertain to the diagnostic test sequence of heated dry, normal, heated dry, normal.

The reason your "Clean" light is not turning off is that it does not see the door being opened or closed meaning it may have a bad door switch or door latch. If you were to flip the circuit breaker off to the dishwasher and then flip it back on the clean light will likely turn off.

I recommend calling a service technician to diagnose and repair your dishwasher.

Read More
Joey S -
Sears Technician
April 01, 2009

Top Parts