Model #66516983200 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Elite Dishwasher. My model number is 665.16983200

A:

I'm glad to hear you feel comfortable doing the repair on the Kenmore dishwasher. I am providing the link for searspartsdirect.com to see a breakdown of the parts. Hope this helps while and expert responds to your specific question.

Read More
Anna T -
June 29, 2012
A:

Thank you for your question and I understand your concern.

Based on your symptom and details I suspect a faulty user interface. It likely has shorted or faulty contacts in the user interface.

You can test and confirm if the interface is faulty using an Ohm meter. I added an image below with the procedure of testing the user interface. NOTE: Disconnect the dishwasher from the power supply before accessing and testing the user interface.

This may be the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
July 02, 2012
See more answers
Q:

Dishwasher problem

A:

The dishwasher is a great convenience. They are great at keep the dishes clean. I did some research on www.managemylife.com. I found a couple of questions similar to yours. I am adding the links below to help you with your question while you wait for your expert response.

Read More
Marc H -
March 12, 2012
A:

From the description you give the problem is likely the motor or the control. If the unit will fill and drain then the door switches and thermal fuse are okay. Listen for a hum from the motor when it is suppose to be running. If you have a meter I can provide a motor diagram so you can check the motor windings. See the image below for help with this. Remember to turn the power off first. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
March 13, 2012
See more answers
Q:

dishwasher 665.16983200 the quick rinse 4 hour delay an cancel bliknks at the same time not responding.

A:

Having an appliance not working properly can be very concerning especailly with the holidays around the corner. While you are waiting on an expert to answer your question, A suggestion I have is to visit Sears Home Services website to set service with a Sears technician. I attached the link below. Hope this helps!

Read More
Dezeray S -
November 30, 2010
A:

Thank you for your question and I understand you concern. We can't do without a working dishwasher.

Based on your symptom and details the touch panel/user interface most likely has stuck or shorted key pads. The touch panel/user interface will most likely have to be removed and replaced.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 01, 2010
See more answers

Top Parts