Model #66516805891 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


I have a blinking red light over the Water Heat button.


The light blinking on the dishwasher can concerning. I found some information for you that I am hoping will be able to help you. I am adding the link below to help you with your question while you wait for your expert response. It may take two business days for your expert to respond. I do hope that this will help you with the dishwasher.

Read More
Marc -
February 06, 2013

The NO Heat Dry keypad should toggle the control lock feature on or off if pressed and held for 3-5 seconds.  From the description you give I suspect you have a stuck or shorted keypad.  Replacing the console is the most likely fix.  First I suggest you remove the console and accesss the main control.  Try removing the ribbon connector and re-installing it and see if there is any improvement.  Please remember to turn the power to the dishwasher off first.  The Kenmore Dishwasher Black Console can be obtained at the highlited link.

Read More
Fred M -
Sears Technician
February 07, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show