Model #6651674993 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

timer in control panel 6651674993 Kenmore Dishwasher

A:

Thank You for contacting SearsPartsDirect.com. I do apologize for the delay in answering your question.

Based on the information you have provided, sounds like your timer has gone bad and needs to be replaced. The timer is what controls each cycle and for how long the cycles are supposed to run. The part number for your timer is 3376355.

If you need further assistance, please resubmit your question with additional details. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
March 25, 2014
Q:

our sears model 665.1674993 dishwasher 6651674993 Kenmore Dishwasher

Q:

Leak at bottom of door 6651674993 Kenmore Dishwasher

A:

The likely cause of that leak is a wave action being created in the wash water at the bottom of the tub.

This model of dishwasher has a pump outlet that has a tendency to work loose over time. Remove the bottom spray arm and check the screws at the top of the pump outlet. There are usually 8 screws that secure the pump outlet cover to the top of the pump. Tighten those screws if they are loose. That will likely fix your problem.

If the pump outlet is tight, then I recommend that you check the spray arms for splits or cracks. A damaged spray arm could also create a wave action in the tub that would cause water to slosh over the front lip of the tub and leak out the bottom of the door.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
February 04, 2014
A:

The likely cause of that leak is a wave action being created in the wash water at the bottom of the tub.

This model of dishwasher has a pump outlet that has a tendency to work loose over time. Remove the bottom spray arm and check the screws at the top of the pump outlet. There are usually 8 screws that secure the pump outlet cover to the top of the pump. Tighten those screws if they are loose. That will likely fix your problem.

If the pump outlet is tight, then I recommend that you check the spray arms for splits or cracks. A damaged spray arm could also create a wave action in the tub that would cause water to slosh over the front lip of the tub and leak out the bottom of the door.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
February 04, 2014
See more answers

Top Parts