Model #6651674991 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


How long should it take to complete a dish washing cycle in model 665.1674991 on the China Light cycle?


This can be normal depending on your water temperature. Although I don't have the specific timing and cycle chart on this dishwasher, I see that it does normally have a delay for water heating. I recommend that you check the water temperature supplied to the dishwasher. It should be at least 120 degrees F. To check the water temperature, run the hot kitchen sink tap for 1 minute and then fill a glass with the hot water. Measure the temperature of the water in the glass with an accurate thermometer. It should measure at least 120 degrees. If the water temperature is significantly lower than 120 degrees, I recommend that you adjust your hot water heater to supply the dishwasher with 120 degree water. This can reduce the time for water heating in the dishwasher and the cycles will finish faster.

If the water temperature is 120 degrees, then you could have a problem with the thermostat or the heating circuit. I recommend that you call a service technician to diagnose and repair this type of problem in the dishwasher.

Here is a link for the Sears Service website: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 13, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show