Model #66516714000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to replace the strike plate on my dishwasher

A:

I can understand your need for some type of instructions on how to properly replace the strike plate on your dishwasher. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
May 23, 2013
A:

Thank you for your question. The dishwasher door always seems to provide some challenges.  The strike plate, part # 3378149 can be ordered from Sears Parts Direct.  To replace this plate, you will need to pull the dishwasher out slightly.  Remember to disconnect power to the dishwasher. Pull up the gasket trim at the top a bit to reveal the two screws. Remove screws, replace plate, verify placement and screw back down.  Make sure gasket trim is back in place, push dishwasher back in and check door latch operation.  I hope this information helps.  Thank you for using Manage my Life.

Read More
Barbara H. -
Sears Technician
May 24, 2013
See more answers

Top Parts