Model #66516712000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a a kenmore dishwasher model num 665.16712000. and when i run the dishwasher it smokes and has a burning smell.

A:

 Hi,

Thanks for contacting  ManageMyLife.  I understand how frustrating it is having trouble with your appliance.

It could be that there is something caught up in the pump and it is having a hard time turning the motor or the heater circuit.  I would recommend you have a service technician out to discover the problem and repair it for you. 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
September 14, 2013
Q:

kenmore model 66516712000

A:

A Dishwasher is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
October 19, 2011
A:

First you will want to turn the power to the dishwasher off. This can be done with a wall switch in the kitchen or at the breaker box if there is no switch.

The images below may be helpful to you in completing this project.

You can also view a video showing this repair on a similar model: Changing Control .

I hope this helps. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
October 19, 2011
See more answers
Q:

Why won't the water pump out of my Kenmore dishwasher?

A:

You did not state or indicate if the motor is running or not when Cancel/Drain is pushed. If the motor is running then the blockage is likely inside the drain hose fitting which is threaded onto the sump. NOTE: Disconnect the power supply from the dishwasher by locating the dedicated circuit breaker inside your house circuit breaker and flipping it off before removing the lower access panels. Remove the lower access panels and the drain hose from the sump. NOTE: Bail all the water out the dishwasher first or you can vacuum the water out if you have a wet/dry vacuum before removing the drain hose. NOTE: Have a shallow pan handy to place under the drain fitting once you remove the drain hose. Once you have the drain hose disconnected from the drain fitting, use a pair of pliers and remove the drain hose fitting by turning it counterclockwise (CCW). Check inside the drain fitting and the drain fitting port in the sump for any debris restricting the water from draining. You will likely find a blockage inside the drain hose fitting. If your dishwasher drain hose connects to a disposal, the blockage could be in the drain hose fitting at the disposal. If it's a new disposal, there is knock out plug that should have been knocked out and removed or the dishwasher will not be able to drain. I added some additional information in the images below.

Resubmit your question with additional details if needed for further instructions.

Read More
Joey S -
Sears Technician
January 25, 2010

Top Parts