Model #66516639000 KENMORE Dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What is button reset sequence for Kenmore dishwasher model 665.16639000? 66516639000 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model66516639000; there is not a reset sequence. Unplug the unit for about five minutes to reset it.

Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 21, 2014
Q:

dishwasher model # 66516639000 leaking at the microswitch for float how to troubleshoot no visible cracks in tub or tubing

A:

I understand how it can be concerning with the Dishwasher leaking. I have taken the time to research on the Manage My Life website and have located similar information towards your issue. While you are waiting for a detailed reply from an expert I have attached the links below. Hope this helps!

Read More
Priscilla V -
February 29, 2012
A:

Thank you for your question and I understand your concern.

If water is sloshing under the float and down the riser tube I would have to suspect the pump outlet screws have backed out some allowing water to spray towards the front bottom areas causing a wave action. See image below.

Remove the lower spray arm and check and tighten all the screws along the perimeter of the lower spray arm support/pump outlet and it will likely find some of the screws loose. You should also check the lower spray arm ports for any debris that may be causing water to spray downwards too.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
March 01, 2012
See more answers
Q:

the pots and pan light is flashing on my Kenmore dishwasher it will not cancel or run.

A:

the pots and pan light is flashing on my Kenmore dishwasher it will not cancel or run.

A common cause of the issue that you are having is the electric control. The electric control is what send the signal for the dishwasher to run.

That part will need to be replaced I have provided the part number below.

Electric control: # 8530929

Read More
Jerome G. - Personal Solutions Manager -
Sears Technician
January 06, 2010
A:

I unplugged the ribbon and it seems to have fixed the problem.you are wondeful

Read More
kathy -
September 04, 2011
See more answers

Top Parts