Model #66516534201 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Dishwasher 665.16534201 Pump Wiring

A:

Trying to make sure that the wiring for the pump is correct and important. I did some research on your model specific and I wasn't able to locate any wiring information. An expert will respond within two business days or less.

Read More
Yadira B -
August 23, 2012
A:

Thank you for your question and I understand your concern.

I added the wiring diagram with the wash motor and drain motor strip circuits below. NOTE: Be sure to disconnect the power supply from the dishwasher before servicing your dishwasher.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 24, 2012
A:

Thank you.

Read More
Rob -
August 24, 2012
A:

Rob: You are welcome and thank you for using Manage My Life. Have a great weekend.

Read More
Joey S -
Sears Technician
August 24, 2012
See more answers
Q:

Kenomore dishwasher won't drain

A:

A Dishwasher that is not working properly can be rather disappointing. I have taken the time to research on the Manage My Life website and have found some information that you may find useful. While you are waiting for an expert to reply I have attached a few links below if you would like to take the time to view.

Read More
Priscilla V -
February 13, 2011
A:

Shut off the breaker for the dishwasher to disconnect electrical power before accessing internal components. The first image below shows the location of the drain pump. You should be able to access drain pump by removing the access and toe panels as shown in the third image. I recommend that you drain the water out of the dishwasher using a wet/dry shop vacuum. Place some towels under the drain pump and remove the drain hose from the pump. Residual water from the tub will flow out of the pump when you remove the hose. Carefully check the hose for any clogs or restrictions. You can drain some water down through the sink connection side of the hose to check it if necessary. If the hose is clear, then you may need to replace the drain pump. The second image shows how to remove the drain pump from the sump assembly. You may need to shut off the water supply and pull the dishwasher out from under the counter to remove the drain pump (the electrical power to the dishwasher should still be shut off).

You can order a new drain pump from the Sears PartsDirect website if necessary.

These tips may help you resolve the drain problem with your dishwasher.

If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 14, 2011
See more answers

Top Parts