Model #66516482300 KENMORE Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Door counterbalance system 66516482300 Kenmore Undercounter dishwasher

A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to have a door balance for your door. I have included a link to our ManageMyLife page where you can purchase the part you need to complete your repair. The door balance components are key numbers 9, 17, 18 and 24. Just click the blue link below to be taken to the page.
Kenmore Dishwasher Model # 66516482300 Parts
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Lokelani -
Sears Technician
August 14, 2013
Q:

model 665.16482300 dishwasher makes too much noise

A:

It can be very confusing knowing exactly how a refrigerator works and what is normal for an appliance and what is not. I have taken some time to further your search here on Manage My Life and I noticed that someone else had asked a similar question with a posted response from an expert. I have attached the link below if you are interested in viewing the web page while waiting for an expert response. Hope this helps, have a wonderful day!

Read More
Alina F. -
August 21, 2010
A:

Without being there to hear the noise or having a good description I will not be able to say with any certainty what is causing the noise. You also did not state when it makes the noise. Does it make the noise while filling, washing or draining? If it makes the noise while filling then it could be the water inlet valve water. If it only makes the noise while washing then it could have a damaged chopper blade or a hard object could be jammed in the chopper blade area. If it only makes the noise while draining water then it's likely something in the drain pump or just a bad drain pump motor. If it appears to only make noise while washing then there is likely something in the chopper blade area. I added the basic instructions in the images below on how to access the chopper blade assembly.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 23, 2010
See more answers
Q:

remaovl of dishwaher

A:

It will depend on how tight a fit the current installation is.

With a 1/2 inch lip in front of the dishwasher to remove it will require being able raise the leveling legs so they can be lifted up and over the 1/2 inch wood floor.

Special care in measuring dimensions of the opening must be used.

The measurements in the image below will help you with this. The minimum distance needed is 34 inches from the floor to the bottom of the counter top. This can be reduced to 33 7/8 inches by removing the wheels on the dishwasher.

It is possible to trap the dishwasher behind the wood floor so measure twice before installing the new floor.

Read More
Fred M -
Sears Technician
May 04, 2010

Top Parts